ALUMINUM ALLOY 1235

With a minimum content of 99.35%, Aluminum Alloy 1235 has become the most common foil alloy on the market today. It’s fairly high aluminum content makes it an excellent alloy for a variety of industrial and food service markets. In the annealed states, it’s very malleable allowing for easy workability and formability. A very similar alloy to 1145 as it contains almost the exact same chemical composition and the same physical attributes. At times, it can be used as a substitute for the 1145 alloy, which is becoming less common in the market today.

Standard Specifications: QQA-1876, ASTM B209

  • aluminum 1235

Comet Metals welcomes any opportunity in Aluminum Foil, Aluminum Coil or sheet products that you may require. Call us at 888-539-5602 today for a quote and learn for yourself  how Comet Metals can assist you in your converter projects. The specifications shown on these pages are not for design purposes.

Download Aluminum Alloy Guide

Download Square Feet Conversion Chart

ASTM Standards:B209
Finish:Standard Finishes
QQA Standards: 1876
Temper: Standard Tempers
Thickness: 0.0005 to0.064 in
Width:0.375 to 60 in
Aluminum (Al): 99.35%
Chromium (Cr): -
Copper (Cu): 0.05%
Iron (Fe): -
Magnesium (Mg): 0.05%
Manganese (Mn): 0.05%
Other Total: -
Silicon (Si): 0.65% (Si+Fe)
Titanium (Ti): 0.06%
Zinc (Zn): 0.10%
Elongation (Annealed): *35
Elongation (H12): 12
Elongation (H14):9
Elongation (H16): 6
Elongation (H18):5
Tensile Strength (Annealed): **13
Tensile Strength (H12): 16
Tensile Strength (H14): 18
Tensile Strength (H16): 21
Tensile Strength (H18): 24
Yield Strength (Annealed): ***5
Yield Strength (H12): 15
Yield Strength (H14): 17
Yield Strength (H16): 20
Yield Strength (H18): 22
* % in 2 inches
** KSI